Welcome光速飞艇为梦而年轻!

搜产品:
热门搜索:数控冲床 冲床价格 液压冲床 油压冲床
在线留言 客户服务
新闻资讯
气动冲床需要定期检查气动系统是否存在..
一种不错的调校数控冲床旋转工位及模具..
冲床日常这样维护 用多少年都如新
彰化某冲床厂家发生火警 烈焰冲天
冲床安全保护装置的应用推广迫在眉睫
直观理解冲床的工作原理
冲床模具需要选择合适的下模间隙
要怎样才能延长冲床模具的使用寿命
数控折弯机系统内高性能体系结构
冲床模具的拆装保养及安装的注意事项
联系方式
销售热线:13706276178
电话:0513-88321598
传真:0513-88321596
联系人:范晓军
邮箱:tpy@kmtaolou.com

新闻详情

冲床厂家简介操作冲床必须遵守的安全规程

发布时间: 点击次数:945来源: 太平洋机床

  因为冲床模配具有速度快、压力大的特点,因此选用冲床作冲裁、成型有必要恪守必定的安全规程。

  1.暴露于压机之外的冲床模配传动部件,有必要设备防护罩,制止在卸下防护罩的情况下开车或试车。
2.开车前应查看主要紧固螺钉有无松动,冲床模配有无裂纹,操纵机构、自动中止设备、离合器、制动器是否正常,光滑体系有无阻塞或缺油。必要时可开空车试验。
3.设备冲床模配有必要将滑块开到下死点,闭合高度有必要正确,尽量避免偏疼载荷;模具有必要紧固牢靠,并通过试压查看。
4.工作中留意力要会集,禁止将手和东西等物件伸进危险区内。小件必定要用专门东西(镊子或送料机构)进行操作。模具卡住坯料时,只准用东西去摆脱。
5.发现压床工作反常或有反常动静,(如连击声、爆裂声)应中止送料,查看原因。如系转动部件松动、操纵设备失灵、模具松动及残缺,应停车修补。
6.每冲完—个工件时,手或脚有必要脱离按钮或踏板,以避免冲床模配误操作。
7.两人以上操作时,应定人开车,留意协调配合好。下班前应将冲床模配模具落靠,断开电源,并进行必要的打扫。 1. press gear transmission parts exposed outside the press, it is necessary to protect the equipment cover, to prevent driving or test run when the shield is removed.
2. before driving, check whether the main fastening screws are loose or not, the punch die is equipped with no cracks, the control mechanism, automatic stop equipment, clutch and brake is normal, smooth system has no obstruction or lack of oil. Open empty car test if necessary.
3. will be equipped with necessary equipment Punch Die slider to the bottom dead center, it is necessary to correct the height, to avoid the eccentric load; the mold is necessary and tighten them through the pressure test, see.
Attention to gathering the 4. work, banning things such as hands and objects into the danger zone. Small pieces must be operated with special things (tweezers or feeding mechanism). When the mold blocks the blank, just use something to get rid of it.
5. press work abnormal or anomalous movement, (such as sound, sound burst combo) should suspend feeding, check the reason. If the rotating parts are loose, the equipment is out of order, the mold is loose and incomplete, the repair should be stopped.
6. when each piece is finished, it is necessary for the hand or foot to disengage from the button or pedal so as to avoid the incorrect operation of the punch die.
7., two or more operation, should be decided to drive, pay attention to coordination and coordination. Before the work, the punch die should be matched with the die, disconnect the power supply and carry out the necessary cleaning.

推荐产品 更多
开卷校平剪切线
开卷校平剪切线
QC11Y液压闸式剪板机
QC11Y液压闸式剪板机
普通冲床
普通冲床
WC67K-250/400折弯机带下补偿
WC67K-250/400折弯机带下补偿
电液折弯机:4+1轴
电液折弯机:4+1轴
机械式三辊对称式卷板机
机械式三辊对称式卷板机
QH11系列精密剪板机
QH11系列精密剪板机
QC12Y液压剪板机
QC12Y液压剪板机

地址:江苏省海安县西场镇 / 邮编:226600 / 销售电话:0513-88321598 / 传真:0513-88321596
CopyRight © 版权所有 2003-2019 南通太平洋数控机床光速飞艇 All rights reserved.
专营:冲床、数控冲床、液压冲床、冲床厂家
/ 苏公网安备32062102000179号
技术支持:旗下 SiteMap